What Are FUDAN FM RFID Cards?

FUDAN FM RFID cards are contactless smart cards built around a selected FUDAN FM chip. The chip determines the card's RF interface, memory capacity and supported functions, while the finished card combines the chip, antenna and card body.

Different FM chip models have different specifications. Selecting the correct model is essential for matching the card to an existing reader, access control system or smart card application.

Kaisere Technology supports card configuration and customization for B2B projects, helping buyers specify the chip, card construction, artwork and personalization requirements before production.

FUDAN FM Chip Models and Technical Specifications

The chip model determines the technical foundation of the finished card. The following models are listed in Fudan Microelectronics' identification and memory product catalog.

FM11RF08 uses a 1K × 8-bit EEPROM organization and supports a 106 kbit/s communication rate. Its datasheet describes a typical communication range of approximately 10 cm, depending on antenna geometry and reader conditions. Actual performance depends on the reader, antenna design and finished card construction.

FM11RF32N provides 32 kbit of memory and an ISO14443 Type A contactless interface. Its memory capacity should be evaluated against the application's data requirements and existing system design.

Chip specifications describe the IC itself. The final card configuration, personalization and system compatibility must match the project requirements.

Reader Compatibility and Technical Selection

Physical card compatibility and complete system compatibility are not the same. A matching RF protocol does not automatically guarantee compatibility with every reader, card application or access control system.

When selecting a FUDAN FM RFID card, specify:

lThe exact chip model used in the existing system

lThe reader or terminal model

lThe required RF protocol and supported commands

lMemory organization and data requirements

lAuthentication, access conditions and key-management requirements

lExisting card dimensions and personalization requirements

For replacement cards or system integration projects, provide the current card model or reader information with your RFQ. This gives the technical team the information required to define a suitable card configuration.

Custom Card Materials, Printing and Personalization

FUDAN FM RFID cards support a range of card customization options for different business, identification and branding projects.

Card dimensions and thickness

Standard CR80 cards measure approximately 85.5 × 54 mm. The standard thickness options listed for this product are 0.76 mm and 0.84 mm, with customized dimensions or thicknesses available for suitable card constructions.

Material options

Available material options listed for the product include:

lRecycled PVC

lPLA

lPET and PETG

lABS

lWood

lTeslin

Material selection depends on the intended card construction, appearance, durability requirements and antenna integration.

Printing and finishing

Available customization options include glossy and matte finishes, epoxy finishing, brushed effects, laser personalization, flat codes, inkjet personalization, embossed characters, barcodes and QR codes.

Custom artwork, branding, serial numbers and other personalization requirements should be included in the project specification. The selected material, finish and personalization method must be compatible with the final card construction.

Applications of FUDAN FM Smart Cards

FUDAN FM card configurations support contactless identification projects when the selected chip and card configuration match the target system.

Typical project categories include:

Access control and employee identification

Cards for authorized personnel identification and access control systems designed for the selected card interface and authentication requirements.

Campus and institutional cards

Contactless cards for suitable campus identification and institutional card programs, with card personalization and data requirements defined by the project.

Membership and customer programs

Custom printed smart cards for membership identification, customer programs and related applications that use a compatible contactless card system.

Transportation and ticketing

Cards for suitable transit and ticketing systems where the chip model, protocol, memory organization and application security requirements match the operating system.

Manufacturing, Quality Control and Bulk Supply

Kaisere Technology supports B2B RFID product projects through card configuration, customization coordination and production planning.

The manufacturing workflow connects confirmed product specifications with the selected card construction, printing requirements and personalization services. Before bulk production, buyers define the chip model, artwork, dimensions, thickness, encoding requirements and applicable acceptance criteria.

Order-level quality control

Quality control is organized around the approved product specification. Inspection requirements cover the applicable card dimensions, thickness, visual finish, printing accuracy, personalization and functional checks.

For orders requiring RF performance or data encoding checks, the relevant test requirements should be included in the purchase specification. Batch inspection records and additional acceptance requirements can be defined for the project.

Production capacity

Kaisere Technology serves international buyers across multiple RFID product categories. Production planning for FUDAN FM RFID cards is based on the selected chip, order quantity, card construction, customization requirements and agreed delivery schedule.

Buyers with recurring orders or larger volume requirements can include their demand forecast and target delivery dates in their quotation request.

Certifications and technical documentation

Company certifications, product documentation and applicable test records should correspond to the actual production entity, product configuration and destination market.

Relevant company and production information is available through Kaisere Technology's company, production and certificate pages. Product-specific documentation and applicable compliance requirements are handled according to the project scope.

Bulk Orders, Samples and Global Shipping

Kaisere Technology supports international B2B purchasing with quotation, customization coordination and shipping arrangements based on the confirmed order requirements.

The quotation process covers the selected chip model, card dimensions, material, artwork, personalization, order quantity, packaging and destination country.

How to order

Step 1 — Submit your requirements

Provide the chip model, application, quantity, card specifications, artwork and delivery destination.

Step 2 — Review the quotation and sample arrangements

Receive a quotation based on the requested configuration and discuss sample requirements before bulk production.

Step 3 — Approve the specifications

Confirm the chip model, card design, dimensions, personalization details and agreed acceptance criteria.

Step 4 — Arrange production and shipment

Production scheduling, inspection, packaging and delivery arrangements follow the confirmed purchase order and destination requirements.

MOQ, pricing and lead time depend on the selected chip, order quantity, personalization and packaging requirements. International shipping arrangements are determined by the destination, shipment size and agreed trade terms.

Frequently Asked Questions

What is a FUDAN FM RFID card?

A FUDAN FM RFID card is a contactless smart card that uses a selected FUDAN FM chip. Its frequency, protocol, memory capacity and supported functions depend on the chip model.

What is the difference between FM11RF08 and FM11RF32N?

FM11RF08 has 8 kbit of memory, equivalent to 1 KB, while FM11RF32N has 32 kbit, equivalent to 4 KB. Both are listed by Fudan Microelectronics with an ISO14443 Type A contactless interface. The appropriate model depends on the memory and system requirements.

What frequency do FUDAN FM RFID cards use?

FM11RF08 operates at 13.56 MHz and uses an ISO/IEC 14443 Type A RF interface. Chip-specific specifications should be used when defining other FM card configurations.

Are FUDAN FM cards compatible with existing RFID readers?

Compatibility depends on the chip model, reader interface, commands, authentication requirements, memory configuration and system implementation. Provide the existing reader or card model when requesting a quotation for a replacement or integration project.

Can FUDAN FM RFID cards be custom printed?

Yes. Custom card projects include supported materials, dimensions, artwork, surface finishes and personalization options. Final options are specified according to the selected card construction.

Can the cards be encoded before shipment?

Personalization and encoding requirements can be included in the order specification. Provide the required data format, numbering method and system requirements when requesting a quotation.

What is the MOQ for FUDAN FM RFID cards?

MOQ depends on the chip configuration, material, printing process and personalization requirements. Include the requested quantity in your RFQ to receive the applicable order terms.

Can I request samples before placing a bulk order?

Yes. Submit the required chip model, application, reader information and customization requirements to discuss a sample order. Sample approval helps align the product configuration with the planned bulk order.

What information is needed for a quotation?

Provide the chip model, application, quantity, dimensions, material, printing artwork, personalization requirements and destination country. Include the reader or system model for compatibility-related projects.